Accidents

If you are involved in or witness an accident or near miss while onsite, please report it to the organisers office immediately.

Emergency Procedures

The venue’s emergency procedures document will be available on your stand on arrival, as part of the on-site pack.

In the event of an emergency please follow the instructions of the security team.

First Aid

If you require first aid at the events, please go to the organiser’s offices.

If you have a medical emergency please alert venue, security or a member of onsite UCAS staff who will be able to help.

Fire Regulations

The following regulations must be complied with by all contractors and exhibitors.

All materials used in the construction of stands, features and displays, including signs and fascias, shall be:
  • Of a suitable nature and quality for the purposes & conditions of intended use.
  • Adequately prepared and fixed in order to adequately perform the functions for which they were designed.
  • Non-combustible, inherently non-flammable, or durably flameproof in accordance with BS476-Part 7.
  • Water-based, where applicable, e.g. adhesives and paint

Risk Assessments

Exhibitors must provide risk assessment for their stand build and any activities that will be happening. The event organisers have completed a risk assessment for each event which can be found in the Enet account in useful documents along with helpful templates and risk assessment advice.

For event specific risk assessment deadlines please check the event location specific information page

Security

Security is provided onsite, and lanyards are provided when you arrive at the venue. Please ensure exhibitor lanyards are always worn. Entry to the venue will not be permitted without a pass.

Please consider the following security advice: :
  • Do not leave your stand unattended at any time and remove valuable items after each day if there are no secure storage facilities.
  • Ensure you have enough staff, and do not ask a neighboring exhibitor to watch your stand while you go for a break .
  • Remove all portable or valuable items from the stand on the evening the show closes. Do not leave the following day for collection
  • Arrive in time for the show. Ensure your stand is staffed at least 15 minutes before show open time each day

IIM-ATM 2024

Joining us will be a diverse array of professionals, including metallurgists, material scientists, engineers, students, and more, all eager to engage in extensive knowledge sharing and lively discussions. At the heart of the IIM-ATM will be an international conference featuring cutting-edge topics such as green manufacturing, strategic and rare metals, additive manufacturing, and accelerated materials development. Thematic sessions will delve into crucial and emerging areas, offering insights that will benefit the entire industrial community. Expect to connect with representatives from industries, Government bodies, research scholars, technical experts, and students.

In addition to the enriching discussions, the event will host a dynamic technical exhibition. This platform will showcase the activities, products, and innovative initiatives
of enterprises across the metal, materials, and manufacturing sectors. Whether you represent a large corporation or a small-scale enterprise, this exhibition will provide invaluable opportunities for networking and discovering the latest methodologies and techniques shaping our industry's landscape.

This will close in 0 seconds

IIM-ATM

The Annual Technical Meeting (ATM) of the Indian Institute of Metals (IIM) serves as a flagship event, annually drawing participants from various sectors of industry, academia, and R&D institutions. Metallurgists, materials scientists, and engineers converge from across the nation, representing a diverse array of backgrounds. This gathering stands as a platform for extensive knowledge-sharing, where participants exchange insights, experiences, and novel ideas.

The international conferences held during the IIM-ATMs illuminate contemporary topics vital to the industrial community, including green manufacturing, reduction of fossil fuels, and digitalization in metals, additive manufacturing, and the accelerated development of materials. These discussions resonate deeply with Attendees, fostering collaboration and innovation within the field.

These gatherings not only provide a platform for sharing knowledge but also serve as a catalyst for collaboration and innovation. By bringing together professionals with diverse backgrounds and perspectives, the IIM-ATMs spark insightful discussions and pave the way for groundbreaking advancements in the field.

The reputation of the IIM-ATM as a flagship event is evident in its ability to attract participants from across the nation and beyond. This speaks to the event's excellence and its significance within the metallurgical community. The exchange of ideas and experiences during these conferences contributes significantly to the continued growth and development of the industry in India and beyond.

This will close in 0 seconds

Indian Institute of Metals

Established in 1945, the Indian Institute for Metallurgists emerged to fulfill a crucial need for a professional body of metallurgists in India. During an era marked by limited technical resources and restricted international communication due to wartime constraints, industries faced significant challenges in acquiring essential metallurgical knowledge. At the time, the Inspectorate of Metals in the ordnance Factory was the sole entity equipped to investigate metal products.

Since its inception, the Indian Institute of Metals (IIM) has experienced remarkable growth, currently boasting a membership exceeding 4600 and steadily expanding. Its inaugural organizational meeting convened on February 24th, 1946, paving the way for an official inauguration ceremony on December 29th, 1947, graced by Hon'ble Dr. Shyama Prasad Mukherjee, Minister for Industry and Supply, at the Royal Asiatic Society Hall in Calcutta. Sri Jahangir, J. Gandhy was appointed as the first President, while Dr. Dara P. Antia assumed the role of the First Honorary Secretary of the Institute.

Today, the IIM has established chapters in nearly all major towns and cities across India, boasting a substantial membership characterized by the highest professional standards. Evolving into a distinguished institution, it remains committed to advancing and promoting the study, practice, and research in Metallurgical Science and Technology. Globally recognized as a leading organization in metallurgy, the IIM upholds primary objectives focused on advancing the science and technology surrounding metals and alloys, while also safeguarding the interests of metallurgists and the metallurgical industry.

The Institute's diverse array of activities includes organizing national and international technical conferences and programs, conducting research endeavors, publishing
materials, and administering qualifying examinations. These initiatives thrive on the voluntary contributions of dedicated office-bearers, council members, chapter chairpersons, secretaries, treasurers, and numerous institute members.

This will close in 0 seconds

IIM Vijayanagar Chapter

Chairman:

Dr. Vinod Nowal

Secretary:

Mr. L R Singh

The IIM Vijayanagar Chapter holds a crucial position in the advancement of metallurgy and materials science within the region, boasting the highest membership count of approximately 550. Established in 2003, the chapter's primary objective is to promote excellence in research, education, and industry collaboration.

Situated in the industrial hub of Vijayanagar, the chapter strategically leverages its proximity to key players in the metallurgical and manufacturing sectors. This strategic
positioning facilitates robust engagement with local industries, fostering seamless technology transfer, skill development initiatives, and collaborative research endeavors. As a dynamic platform, the chapter serves as a catalyst for professionals, researchers, and students to exchange knowledge, ideas, and best practices, thus driving innovation and contributing significantly to the sector's growth.

This will close in 0 seconds

IIM Bangalore Chapter

Chairman:

Prof. Abhik Choudhury

Secretary:

Prof. Praveen Kumar

The IIM Bangalore Chapter stands as a vibrant hub for professionals, researchers, and students dedicated to advancing metallurgy and materials science within the region. With its primary goal of promoting education, research, and industry collaboration, this chapter serves as a catalyst for progress in the metallurgical community.

Located in the bustling city of Bengaluru, often dubbed India's Silicon Valley, the chapter benefits immensely from its close proximity to a diverse array of research institutions and academic centers of excellence. This strategic advantage fosters a dynamic ecosystem ripe for collaboration and innovation, enabling the chapter to tackle pressing challenges and explore new opportunities within the Metallurgical domain.

In essence, the IIM Bangalore Chapter serves as a dynamic focal point for the metallurgical community, fostering collaboration, innovation, and excellence across research, education, and industrial practices. Through its diverse range of activities and initiatives, the chapter plays a pivotal role in shaping the trajectory of metallurgy and materials science, not only within the region but also on a Broader scale.

This will close in 0 seconds

IIM Dolvi Chapter

Chairman:

Mr. Ashish Chandra

Secretary:

Dr. Sujoy S. Hazra

The IIM Dolvi Chapter holds as a cornerstone objective the facilitation of knowledge exchange and networking among its members. To achieve this, the chapter organizes a diverse array of events, including seminars, conferences, and technical workshops, featuring distinguished experts and thought leaders from Academia, industry and research organizations.

These platforms provide invaluable opportunities for members to share cutting-edge research, best practices, and industry trends, thereby enhancing their professional development. Through collaborative engagement and interactive discourse, the IIM Dolvi Chapter fosters a dynamic environment conducive to continuous learning and innovation within the metallurgical community

This will close in 0 seconds

IIM Salem Chapter

Chairman:

Dr. S. Manjini

Secretary:

Mr. D. Saravanan

The IIM Salem Chapter plays a pivotal role in advancing excellence, innovation, and sustainability within the field of metallurgy. Through a diverse range of activities and
initiatives, the chapter actively contributes to the growth and development of the metallurgical industry, while also nurturing the next generation of professionals and researchers.

Among its notable initiatives, the chapter organizes a Metal Quiz for School Children, aimed at igniting interest and awareness in metallurgy among young minds. Additionally,
the chapter hosts Invited Lectures by professors from esteemed universities, followed by technical presentations and discussions on Various metallurgical case studies.

These events serve as invaluable platforms for knowledge exchange and collaboration among industry experts, academia, and aspiring metallurgists, fostering a dynamic environment of learning and innovation. In essence, the IIM Salem Chapter's dedication to promoting excellence and nurturing talent underscores its significant contribution to the advancement of metallurgy.

This will close in 0 seconds

International Symposium on Transformational Technologies in Materials & Manufacturing

At the core of this paradigm shift lies a shared pursuit of enhanced efficiency, sustainability, and performance across industries. By harnessing these transformative technologies, manufacturers can unlock unprecedented levels of precision, customization, and cost-effectiveness in their production processes. This symposium serves as a focal point for industry thought leaders, researchers, and innovators to convene and explore the latest breaktrhoughs that are shaping the future of manufacturing.

With leading minds from around the world presenting their pioneering research and insights, this conference offers a unique platform for industry stakeholders to glean invaluable knowledge and perspectives. By showcasing transformative technologies and discussing their real-world applications, we empower industries to navigate the evolving landscape and make informed decisions about their technological investments.

Join us as we collectively chart a course toward a more efficient, sustainable, and technologically-driven future for materials and manufacturing.

This will close in 0 seconds